7-1/4" 60-Tooth Tct Saw Blade For Aluminum & Non-Ferrous Metals

• Product Specification
• Shipping
• Refund

Product Specification

7-1/4" 60-TOOTH TCT SAW BLADE FOR ALUMINUM & NON-FERROUS METALS

The Benchmark Abrasives 7-1/4" 60-Tooth TCT saw blade is built for clean, controlled cutting of aluminum and other non-ferrous metals. Its 60-tooth configuration and TCG (Triple Chip Grind) tooth geometry help produce a smoother finished edge, making it a strong choice for fabrication and installation work where cut quality matters.

Designed for compatible corded and cordless circular saws, this blade combines durable tungsten carbide-tipped teeth with a 0.075" kerf for efficient cutting through aluminum sheet, extrusion, bar stock and similar non-ferrous materials. The 5/8" arbor with diamond knockout provides additional fitment flexibility for saws designed around either arbor configuration.

Quantity: 1 Blade

Product Specifications

Product Features

• 60-tooth configuration provides a strong balance of cutting efficiency and clean edge quality.
• TCG tooth geometry is designed for controlled cutting of aluminum and other non-ferrous materials.
• Tungsten carbide-tipped teeth provide a durable cutting edge for repeated use.
• 0.075" kerf provides an efficient cutting path through aluminum and similar materials.
• 5/8" arbor with diamond knockout provides fitment options for compatible circular saws.
• 5,800 RPM maximum speed clearly identifies the operating limit for proper machine selection.

Materials & Applications

Best For

• Aluminum
• Aluminum extrusion
• Aluminum sheet
• Aluminum bar
• Aluminum profiles
• Brass
• Copper
• Bronze
• Other similar non-ferrous metals

This blade is well suited for fabrication, construction, installation and general shop applications where a clean, accurate cut in aluminum is preferred over a more aggressive coarse-tooth finish.

Machine Compatibility

Designed for compatible 7-1/4" corded and cordless circular saws that accept a 5/8" arbor or compatible diamond knockout configuration. The current product listing also identifies corded and cordless circular saws as the intended machines.

Always verify your saw's blade diameter, arbor configuration and operating RPM before installation. The saw must be designed to accept the blade and must not exceed the blade's 5,800 RPM maximum rating.

Choosing the Right Tooth Count

With 60 teeth on a 7-1/4" blade, this blade provides a useful balance between cutting speed and edge finish for general-purpose aluminum and non-ferrous cutting.

Tips for Better Blade Performance

• Secure the workpiece firmly before cutting.
• Allow the blade to cut at a controlled feed rate rather than forcing the saw through the material.
• Keep aluminum chips clear of the cutting area.
• Inspect the blade before use for damaged, missing, or excessively worn teeth.
• Replace or professionally sharpen the blade when cutting performance noticeably declines.
• Saw blade lubricant or cutting wax can help reduce aluminum buildup on the teeth during demanding applications.
• Never exceed the blade's 5,800 RPM maximum operating speed.

Safety

• Use only on saws designed to accept this blade diameter and arbor configuration.
• Never install the blade on a machine that exceeds the blade's maximum RPM.
• Keep all factory guards installed and properly functioning.
• Inspect the blade before every use. Do not use a cracked, warped, or damaged blade.
• Secure the workpiece and maintain control of the saw throughout the cut.
• Wear appropriate eye, face, hearing, and respiratory protection for the material being cut.
• This blade is designed for aluminum and non-ferrous metal cutting. Use a Benchmark TCT blade specifically designed for steel/ferrous metals when cutting steel.