10" 60-Tooth Tct Saw Blade For Aluminum & Non-Ferrous Metals

• Product Specification
• Shipping
• Refund

Product Specification

10" 60-TOOTH TCT SAW BLADE FOR ALUMINUM & NON-FERROUS METALS

The Benchmark Abrasives 10" 60-Tooth TCT saw blade is designed for efficient, controlled cutting of aluminum and other non-ferrous metals. With fewer teeth than the 80T and 100T options in our 10" aluminum blade lineup, the 60-tooth configuration favors faster cutting while still providing the clean edge quality needed for everyday fabrication and shop work.

Durable tungsten carbide-tipped teeth and TCG (Triple Chip Grind) geometry provide dependable cutting performance through aluminum sheet, extrusion, bar stock and similar non-ferrous materials. A 0.110" kerf and standard 5/8" arbor make this blade a practical choice for compatible miter saws and Evolution® saws used for repeated aluminum cutting.

Quantity: 1 Blade

Product Specifications

Product Features

• 60-tooth configuration favors faster, efficient cutting while maintaining a clean edge.
• TCG tooth geometry is designed for controlled cutting of aluminum and other non-ferrous metals.
• Tungsten carbide-tipped teeth provide a durable cutting edge for repeated use.
• 0.110" kerf provides a stable cutting path through aluminum sheet, extrusion, and stock.
• 5/8" arbor fits compatible miter saws and other saws designed for this arbor size.
• 5,200 RPM maximum speed provides a clear operating limit for proper machine selection.

Materials & Applications

Best For

• Aluminum
• Aluminum extrusion
• Aluminum sheet
• Aluminum bar
• Aluminum profiles
• Aluminum die castings
• Brass
• Copper
• Bronze
• Other similar non-ferrous metals

The 60-tooth configuration is particularly useful for fabrication, production cutting, installation and general shop work where cutting efficiency and a clean finished edge are both important.

Machine Compatibility

Designed for compatible 10" miter saws and Evolution® saws that accept a 5/8" arbor and operate within the blade's maximum speed rating.

Always verify your saw's blade diameter, arbor size and operating RPM before installation. The saw must be designed to accept a 10" blade with a 5/8" arbor and must not exceed the blade's 5,200 RPM maximum rating.

Choosing the Right Tooth Count

Within Benchmark's 10" aluminum blade lineup, the 60-tooth blade favors faster cutting, while the 80T and 100T options progressively favor a smoother finished edge.

Tips for Better Blade Performance

• Secure the workpiece firmly before cutting.
• Use a steady, controlled feed rate and allow the blade to do the cutting.
• Keep aluminum chips clear of the cutting area.
• Inspect the blade before use for damaged, missing, or excessively worn teeth.
• Replace or professionally sharpen the blade when cutting performance noticeably declines.
• Saw blade lubricant or cutting wax can help reduce aluminum buildup on the teeth during demanding applications.
• Never exceed the blade's 5,200 RPM maximum operating speed.

Safety

• Use only on saws designed to accept this blade diameter and arbor configuration.
• Never install the blade on a machine that exceeds the blade's maximum RPM.
• Keep all factory guards installed and properly functioning.
• Inspect the blade before every use. Do not use a cracked, warped, or damaged blade.
• Secure the workpiece before cutting and maintain control throughout the cut.
  
• Wear appropriate eye, hearing, and respiratory protection for the material and application.
• This blade is designed for aluminum and non-ferrous metal cutting. Use a Benchmark TCT blade specifically designed for steel/ferrous metals when cutting steel.