14" 100-tooth Tct Saw Blade For Aluminum & Non-ferrous Metals

• Product Specification
• Shipping
• Refund

Product Specification

14" 100-TOOTH TCT SAW BLADE FOR ALUMINUM & NON-FERROUS METALS

The Benchmark Abrasives 14" 100-Tooth TCT saw blade is built for clean, controlled cutting of larger aluminum and non-ferrous workpieces on compatible low-RPM dry-cut saws. Its 100-tooth configuration and TCG (Triple Chip Grind) tooth geometry provide smooth cutting performance and clean edge quality for fabrication, production and shop applications.

Designed for larger-capacity cutting, this blade combines durable tungsten carbide-tipped teeth with a 0.138" kerf for consistent performance through aluminum extrusion, bar stock, sheet, profiles and similar non-ferrous materials. The 1" arbor is designed for compatible 14" dry-cut saws operating at or below the blade's 1,800 RPM maximum speed.

Quantity: 1 Blade

Product Specifications

Product Features

• 14" blade diameter provides greater cutting capacity for larger aluminum stock and profiles.
• 100-tooth configuration provides controlled cutting with a clean finished edge.
• TCG tooth geometry is designed for aluminum and other non-ferrous metals.
• Tungsten carbide-tipped teeth provide a durable cutting edge for repeated use.
• 0.138" kerf provides a stable cutting path through larger aluminum workpieces.
• 1" arbor fits compatible 14" low-RPM dry-cut saws.
• 1,800 RPM maximum speed identifies the operating limit for proper machine selection.

Materials & Applications

Best For

• Aluminum
• Aluminum extrusion
• Aluminum sheet
• Aluminum bar
• Aluminum profiles
• Aluminum die castings
• Brass
• Copper
• Bronze
• Other similar non-ferrous metals

The larger 14" diameter makes this blade particularly useful for fabrication and production environments cutting larger aluminum profiles, extrusion and stock where both cutting capacity and clean edge quality are important.

Machine Compatibility

Designed for compatible 14" low-RPM dry-cut saws that accept a 1" arbor and operate within the blade's maximum speed rating.

Always verify your saw's blade diameter, arbor size and operating RPM before installation. The saw must be designed to accept a 14" blade with a 1" arbor and must not exceed the blade's 1,800 RPM maximum rating.

Choosing the Right Tooth Count

With 100 teeth on a 14" blade, this blade is designed to provide controlled cutting and clean edge quality for larger aluminum and non-ferrous applications.

Tips for Better Blade Performance

• Secure the workpiece firmly before cutting.
• Use a steady, controlled feed rate and allow the blade to do the cutting.
• Keep aluminum chips clear of the cutting area.
• Inspect the blade before use for damaged, missing, or excessively worn teeth.
• Replace or professionally sharpen the blade when cutting performance noticeably declines.
• Saw blade lubricant or cutting wax can help reduce aluminum buildup on the teeth during demanding applications.
• Never exceed the blade's 1,800 RPM maximum operating speed.

Safety

• Use only on saws designed to accept this blade diameter and arbor configuration.
• Never install the blade on a machine that exceeds the blade's maximum RPM.
• Keep all factory guards installed and properly functioning.
• Inspect the blade before every use. Do not use a cracked, warped, or damaged blade.
• Secure the workpiece before cutting and maintain control throughout the cut.
  
• Wear appropriate eye, hearing, and respiratory protection for the material and application.
• This blade is designed for aluminum and non-ferrous metal cutting. Use a Benchmark TCT blade specifically designed for steel/ferrous metals when cutting steel.