14" 120-tooth Tct Saw Blade For Steel & Ferrous Metal

• Product Specification
• Shipping
• Refund

Product Specification

14" 120-TOOTH TCT SAW BLADE FOR STEEL & FERROUS METAL

The Benchmark Abrasives 14" 120-Tooth TCT Saw Blade is designed for smooth, controlled cutting of steel and other ferrous metals on compatible low-RPM dry-cut saws. Its high 120-tooth configuration and TCG (Triple Chip Grind) tooth geometry prioritize edge quality, making it the finish-focused choice in our 14" steel blade lineup.

Tungsten carbide-tipped teeth help produce clean cuts with fewer sparks and less heat than traditional abrasive cutting methods. The 1" arbor and 0.098" kerf provide a stable cutting setup for steel tubing, angle iron, plate, pipe, rebar and flat stock where reduced burrs and secondary cleanup are important.

Quantity: 1 Blade

Product Specifications

Product Features

• 120-tooth configuration prioritizes smoother edge quality for finish-sensitive steel cutting.
• TCG tooth geometry helps distribute the cutting load across alternating tooth profiles for durable metal-cutting performance.
• Tungsten carbide-tipped teeth provide a long-lasting cutting edge for repeated steel cutting.
• 0.098" kerf provides a stable cutting path through common ferrous-metal shapes.
• 1" arbor fits compatible 14" low-RPM dry-cut saws.
• Reduced sparks and heat compared with traditional abrasive cutting methods help provide a cleaner cutting experience.
• 1,800 RPM maximum speed identifies the operating limit for proper machine selection.

Materials & Applications

Best For

• Mild steel
• Steel
• Wrought iron
• Square tubing
• Round pipe and tubing
• Angle iron
• Rebar
• Flat stock
• Steel plate up to 1/8"

The 120-tooth configuration is especially well suited for fabrication, installation and finish-sensitive metalworking where smooth edge quality and reduced post-cut cleanup are more important than maximum cutting speed.

Machine Compatibility

Designed for compatible 14" low-RPM dry-cut saws that accept a 1" arbor and operate within the blade's maximum speed rating.

Common compatible saws include:

• DEWALT® DW872
• Evolution ® models LC1230, S14CPS, R355CPS and S355CPSL

Always verify your saw's blade diameter, arbor size and operating RPM before installation. The saw must not exceed the blade's 1,800 RPM maximum rating.

Choosing the Right Tooth Count

Within Benchmark's 14" steel blade lineup, the 120-tooth blade is the finish-focused option, providing the smoothest edge of the 66T, 80T and 120T choices.

Tips for Better Blade Performance

• Secure the workpiece firmly before cutting.
• Use a steady, controlled feed rate and allow the carbide teeth to perform the cut.
• Avoid forcing the blade through the material.
• Keep chips and debris clear of the cutting path.
• Inspect the blade before use for damaged, missing or excessively worn teeth.
• Replace or professionally sharpen the blade when cutting performance noticeably declines.
• Saw blade lubricant can help reduce buildup and extend blade life during demanding applications.
• Never exceed the blade's 1,800 RPM maximum operating speed.

Safety

• Use only on saws designed to accept this blade diameter and arbor configuration.
• Never install the blade on a machine that exceeds the blade's maximum RPM.
• Keep all factory guards installed and properly functioning.
• Inspect the blade before every use. Do not use a cracked, warped or damaged blade.
• Secure the workpiece before cutting and maintain control throughout the cut.
• Do not use this blade on stainless steel or hardened materials.
• Wear appropriate eye, hearing, respiratory and hand protection for the application.