10" 80-tooth Tct Saw Blade For Steel & Ferrous Metal

• Product Specification
• Shipping
• Refund

Product Specification

10" 80-TOOTH TCT SAW BLADE FOR STEEL & FERROUS METAL

The Benchmark Abrasives 10" 80-tooth TCT saw blade is designed for clean, controlled cutting of steel and other ferrous metals. Its higher 80-tooth configuration and TCG (Triple chip grind) tooth geometry favor smoother edge quality, making it a strong choice for fabrication and metalworking applications where cut finish matters.

Tungsten carbide-tipped teeth help produce clean, burr-reduced cuts with fewer sparks and less heat than traditional abrasive cutting methods. The 5/8" arbor with diamond knockout fits compatible miter saws and Evolution® saws, while the 0.091" kerf provides a stable cutting path through tubing, angle iron, plate, rebar and flat stock.

Quantity: 1 Blade

Product Specifications

Product Features

• 80-tooth configuration favors smoother edge quality and more controlled cutting.
• TCG tooth geometry helps distribute the cutting load across alternating tooth profiles for durable metal-cutting performance.
• Tungsten carbide-tipped teeth provide a long-lasting cutting edge for repeated steel cutting.
• 0.091" kerf provides a stable cutting path through common ferrous-metal shapes.
• 5/8" arbor with diamond knockout provides fitment flexibility for compatible saws.
• Reduced sparks and heat compared with traditional abrasive cutting methods help provide a cleaner cutting experience.
• 5,200 RPM maximum speed clearly identifies the operating limit for proper machine selection.

Materials & Applications

Best For

• Mild steel
• Steel
• Wrought iron
• Square tubing
• Round pipe and tubing
• Angle iron
• Rebar
• Flat stock
• Steel plate up to 1/8"

The 80-tooth configuration is especially useful for fabrication, installation, maintenance and general metalworking applications where a cleaner finished edge is more important than maximizing cutting speed.

Machine Compatibility

Designed for compatible 10" miter saws and Evolution® saws that accept a 5/8" arbor or compatible diamond knockout configuration.

Always verify your saw's blade diameter, arbor configuration and operating RPM before installation. The saw must not exceed the blade's 5,200 RPM maximum rating.

Choosing the Right Tooth Count

With 80 teeth on a 10" blade, this is the smoother-cutting option compared with the 52T version, making it better suited for thinner material and finish-sensitive steel cutting.

Tips for Better Blade Performance

• Secure the workpiece firmly before cutting.
• Use a steady, controlled feed rate and allow the carbide teeth to perform the cut.
• Avoid forcing the blade through the material.
• Keep chips and debris clear of the cutting path.
• Inspect the blade before use for damaged, missing or excessively worn teeth.
• Replace or professionally sharpen the blade when cutting performance noticeably declines.
• Saw blade lubricant can help reduce buildup and extend blade life during demanding applications.
• Never exceed the blade's 5,200 RPM maximum operating speed.

Safety

• Use only on saws designed to accept this blade diameter and arbor configuration.
• Never install the blade on a machine that exceeds the blade's maximum RPM.
• Keep all factory guards installed and properly functioning.
• Inspect the blade before every use. Do not use a cracked, warped or damaged blade.
• Secure the workpiece before cutting and maintain control throughout the cut.
• Do not use this blade on stainless steel or hardened materials.

• Wear appropriate eye, hearing, respiratory, and hand protection for the application.