What each shape is designed for
Both inverted cone and countersink carbide burrs remove material from edges and holes, but their geometry suits different access and angle requirements. An inverted cone burr, such as the SN-4 or SN-6, has a tapered side and flat bottom, making it effective for rear side chamfering, edge milling, and V-cuts in hard-to-reach areas. A countersink burr like the SJ-3 uses a 60-degree angled head designed specifically for beveling, counterboring, and chamfering bores at a fixed angle. The choice depends on whether you need a flat-bottomed cut or a precise angled seat for a fastener head.
Inverted cone vs countersink: key differences
The table below highlights the main differences between an inverted cone burr and a 60-degree countersink burr based on supplied specifications.
- Head shape and angle: Inverted cone burrs (SN-4, SN-6) have a flat bottom with tapered sides, suitable for V-cuts and edge milling. Countersink burrs (SJ-3) have a 60-degree angled head, ideal for creating a precise angled seat for screws or chamfering holes.
- Cut length and diameter: SN-4 has a 1/2" cut length and 1/2" head diameter; SN-6 has a 3/4" cut length and 5/8" head diameter. SJ-3 has a 5/16" cut length and 3/8" head diameter, making it more compact for tight spots.
- Primary applications: Inverted cone burrs are listed for rear side chamfering, edge milling, and V-cuts. Countersink burrs are listed for beveling, counterboring, chamfering bores, and getting into acute angled areas.
- Material compatibility: Both are double-cut tungsten carbide burrs suitable for ferrous metals (cast iron, steel, stainless, titanium, nickel), non-ferrous metals (copper), and other materials (fiberglass, plastic, hard rubber, wood, stone).
Specifications at a glance
- SN-4 Inverted Cone Premium Tungsten Carbide Burr: SN-4 inverted cone burr: 1/2" head diameter, 1/2" cut length, 1/4" shank, double cut, max RPM 70,000 (35,000 typical). This size works well for general chamfering and V-cuts on medium-sized edges.

SN-4 Inverted Cone Premium Tungsten Carbide Burr - SN-6 Inverted Cone Premium Tungsten Carbide Burr: SN-6 inverted cone burr: 5/8" head diameter, 3/4" cut length, 1/4" shank, double cut, max RPM 70,000 (35,000 typical). Larger cutting surface allows faster stock removal on wider edges.

SN-6 Inverted Cone Premium Tungsten Carbide Burr - SJ-3 60° Countersink Premium Tungsten Carbide Burr: SJ-3 60° countersink burr: 3/8" head diameter, 5/16" cut length, 1/4" shank, double cut, max RPM 70,000 (35,000 typical). Compact size and fixed angle make it ideal for precision countersinking and chamfering small bores.
When to choose each burr
Choose an inverted cone burr (SN-4 or SN-6) when you need to chamfer the rear side of a hole, mill an edge, or create a V-groove. The flat bottom allows you to work on both the edge and adjacent face without changing tools. The larger SN-6 removes material faster on wider surfaces.
Choose a countersink burr (SJ-3) when you need a precise 60-degree angled seat for a flathead screw or bolt, or when chamfering a bore at a consistent angle. Its compact head fits into tighter spaces and produces a clean, uniform bevel around holes.
For interior contour work or rounded edges in small places, a tree shape burr like the SF-5 (radius end) is a better option, but that is a separate shape category.
Safety and operating tips for both shapes
Use these burrs only in die grinders or hand-held pneumatic grinders, not in electric power drills, as slower speeds can cause chipping. Start at a lower speed and increase gradually until you achieve clean cutting. Apply light pressure and let the tool do the work; bearing down reduces tool life and dulls the burr. Always wear proper PPE including safety glasses, hearing protection, respirator, and hand protection. Keep all machine guards in place.




