The arbor and max RPM decide fit before tooth count does
You cannot swap a 4-1/2" blade onto a saw built for a 16" blade, or the reverse, even if both are TCT wood blades. The arbor diameter must match your saw spindle, and the blade's max RPM must be at or above your saw's no-load speed. The catalog gives two clear examples: the 4-1/2" 18-tooth blade has a 3/8" arbor and a 14,000 max RPM, while the 16" 32-tooth blade has a 1" arbor and a 4,600 max RPM. Those numbers point to very different machines, so start by checking the arbor and speed rating on your saw before comparing tooth counts.
Fit and speed specs side by side
- 4-1/2" 18 Tooth TCT Saw Blade for Fast Cutting & Trimming: Outer diameter 4-1/2", arbor 3/8", 18 teeth, kerf 0.071", max RPM 14,000 These dimensions suit small circular saws and trim saws with a 3/8" arbor; the 14,000 RPM ceiling covers high-speed small saws.

4-1/2" 18 Tooth TCT Saw Blade for Fast Cutting & Trimming - 16" 32 Tooth TCT Saw Blade for General Purpose Cutting: Outer diameter 16", arbor 1", 32 teeth, kerf 0.118", max RPM 4,600 This is a large beam-saw blade with a 1" arbor and a much lower speed ceiling; it will not fit a small saw and must not run on one rated above 4,600 RPM.

16" 32 Tooth TCT Saw Blade for General Purpose Cutting
Tooth count and kerf tell you what kind of cut to expect
The 4-1/2" blade carries 18 teeth and a 0.071" kerf, which the catalog describes as excellent for fast cutting and trimming of softwoods and hardwoods, with occasional plywood, wood framing, and decking. Fewer teeth generally mean a faster cut with a less finished edge, so this blade is aimed at speed and portability rather than furniture-grade finish. The 16" blade has 32 teeth and a 0.118" kerf, listed for general-purpose cutting of softwoods and hardwoods plus occasional plywood, framing, and decking. The wider kerf removes more material per pass, and the higher tooth count relative to its diameter supports a cleaner general-purpose cut on a large saw. If you need a finer finish in either size class, the catalog's own guidance is to choose a blade with more teeth.
Which blade fits which job
- 4-1/2" 18-tooth: small-saw trimming and fast crosscuts: Best when your saw has a 3/8" arbor and you want a light, fast-cutting blade for trimming softwoods and hardwoods, with occasional plywood, framing, or decking. The 18-tooth count favors speed over a polished edge.
- 16" 32-tooth: large-saw general-purpose cutting: Suited to a 1" arbor beam saw rated no higher than 4,600 RPM. The 32-tooth count and 0.118" kerf make it a general-purpose wood blade for thicker stock and occasional plywood, framing, or decking.
- Not a matched pair: These two blades do not compete for the same saw. The real choice is which machine you own or plan to use; once that is settled, the blade size follows from the arbor and max RPM.
What about the 6" blade in the search phrase?
The supplied records cover a 4-1/2" blade and a 16" blade, not a 6" model. If you are shopping for a 6" TCT wood blade, use the same checks shown here: confirm the arbor diameter, confirm the blade's max RPM is at least your saw's speed, and match tooth count to the finish you need. The catalog does not provide a 6" option in this evidence, so treat any 6" recommendation as outside what these records can confirm. For small circular saw trimming, the 4-1/2" 18-tooth blade is the closest documented match in this catalog.
Safety and compatibility checks before either blade goes on
- Wood only: Both blades are engineered for wood applications only. Do not cut metal with them.
- Never exceed the blade's max RPM: Running a blade on a saw rated higher than the max RPM on the blade is dangerous and shortens blade life. The 4-1/2" blade is rated to 14,000 RPM; the 16" blade to 4,600 RPM.
- Keep guards in place: The catalog instructs keeping all guards on the machine during use.
- Wear PPE: Always wear proper personal protective equipment, including safety glasses, hearing protection, a respirator, and hand protection.



