Two blades, two different jobs
A tuck point blade and a demolition blade can both cut masonry, but they are built for different kinds of work. The 4" Tuck Point Diamond Blade is a narrow, thick-rimmed blade for mortar removal and grout repair. The 7" x 7/8"-DIA-5/8" Vacuum Brazed Demolition Blade is a general-purpose cutter listed for a wide range of materials, from wood and plastic pipe to concrete, masonry and metal.
The decision comes down to how wide a cut you need, what arbor your tool accepts, and whether you are removing mortar or cutting through mixed materials.
Fit specs that decide compatibility
- 4" Tuck Point Diamond Blade: 4" x .250” x 7/8”-5/8”, 7mm segment The .250” thickness and 7mm segment make this a dedicated mortar-removal blade. The 7/8”-5/8” arbor covers common grinder and saw spindles.

4" Tuck Point Diamond Blade - 7" x 7/8"-DIA-5/8" Vacuum Brazed Demolition Blade: Proprietary single layer thermo bonding technology with 1" arbor bushed to 20mm. The 1" arbor with a 20mm bushing fits tools that accept that spindle size. Check your tool's arbor before ordering.

7" x 7/8"-DIA-5/8" Vacuum Brazed Demolition Blade
Material lists: mortar removal vs all-purpose cutting
The tuck point blade is listed for mortar removal, grout repair and cleaning of concrete. The demolition blade is listed for a much broader set: wood, PVC and polyethylene pipe, concrete, masonry, metal, ductile iron, cast iron, copper, stone, stucco, brick, roofing, sheet metal and more.
- 4" Tuck Point Diamond Blade: Best for raking out mortar joints, grout repair and cleaning concrete surfaces. The .250” rim and 7mm segment are designed for that narrow, controlled cut. It is not listed for cutting metal or wood.
- 7" Vacuum Brazed Demolition Blade: Best when you need one blade to cut through mixed materials, including nails, screws and brackets. It is listed for wet or dry use and for circular saws, right-angle grinders, masonry saws or tile saws.
When the tuck point blade is the right choice
Choose the 4" Tuck Point Diamond Blade when your work is mortar removal and joint repair. The narrow .250” kerf keeps the cut focused on the joint rather than the brick or block face. It is listed for use with angle grinders, circular saws and tuck pointers, and it can run wet or dry.
This is not a general demolition blade. If you need to cut through rebar, sheet metal or wood, the tuck point blade is not the tool for that cut.
When the demolition blade earns its place
The 7" Vacuum Brazed Demolition Blade is the better fit when a job mixes materials or when you do not know what is inside the cut. Its material list includes nails, screws and brackets, so it can handle embedded fasteners that would damage a mortar blade. It is listed for wet or dry use and for circular saws, right-angle grinders, masonry saws and tile saws.
The tradeoff is precision. A demolition blade is not designed for narrow mortar joints. If your goal is clean tuck pointing, the wider kerf and general-purpose bond are not the right match.
Arbor and tool fit before you buy
The tuck point blade uses a 7/8”-5/8” arbor, which fits many angle grinders and circular saws. The demolition blade uses a 1" arbor bushed to 20mm, so confirm your tool's spindle matches before ordering. The supplied information does not list maximum RPM for either blade. Check the blade marking and your tool's speed rating before mounting.
Catalog evidence for both blades
- 4" Tuck Point Diamond Blade: Premium Sintered with long slots and a higher diamond count. Sintered construction with long slots is built for the abrasive wear of mortar removal.
- 7" x 7/8"-DIA-5/8" Vacuum Brazed Demolition Blade: These blades are designed to last up to 40 times longer than an abrasive and will cut virtually everything. The vacuum brazed bond is positioned for long life across mixed materials, which suits demolition work.
A simple way to decide
If your work is mortar removal, grout repair or cleaning concrete joints, take the 4" Tuck Point Diamond Blade. If you need one blade for mixed materials, embedded fasteners or general demolition cutting, take the 7" Vacuum Brazed Demolition Blade. Check arbor size and tool compatibility first, and follow the blade and tool markings for safe operation.



