Voltar ao blog
Guias Práticos 2026-11-20 Quality Industrial Abrasives and Tools | Benchmark Abrasives 0 visualizações

How to Cut Aluminum with a TCT Saw Blade

How to Cut Aluminum with a TCT Saw Blade

Learn how to cut aluminum and non-ferrous metals safely with a TCT saw blade. This guide covers blade selection, saw compatibility, and practical cutting tips.

Choosing the Right TCT Blade for Aluminum

Cutting aluminum and other non-ferrous metals requires a blade designed for the material. Standard wood-cutting blades can grab or produce rough edges. A tungsten carbide-tipped (TCT) saw blade with a high tooth count and Triple Chip Grind (TCG) tooth geometry is built to shear through aluminum cleanly.

Benchmark Abrasives offers two 60-tooth TCT blades for non-ferrous metals: a 7-1/4" blade and a 6-1/2" blade. Both use TCG tooth geometry and a 0.075" kerf to produce smoother finished edges compared to coarser general-purpose blades. The choice between them depends on your saw's blade diameter limit.

Two TCT Blades for Aluminum at a Glance

  • 7-1/4" 60-Tooth Tct Saw Blade For Aluminum & Non-Ferrous Metals: 7-1/4" diameter, 60 teeth, TCG tooth geometry, 0.075" kerf, 5/8" arbor with diamond knockout, maximum 5,800 RPM. This blade fits most full-size corded and cordless circular saws. The higher RPM limit supports use with higher-speed saws, provided the saw does not exceed 5,800 RPM.
    7-1/4" 60-Tooth Tct Saw Blade For Aluminum & Non-Ferrous Metals
    7-1/4" 60-Tooth Tct Saw Blade For Aluminum & Non-Ferrous Metals
  • 6-1/2" 60-Tooth Tct Saw Blade For Aluminum & Non-Ferrous Metals: 6-1/2" diameter, 60 teeth, TCG tooth geometry, 0.075" kerf, 5/8" arbor with diamond knockout, maximum 4,600 RPM. This smaller blade suits compact or trim saws that accept a 6-1/2" blade. Its lower RPM limit matches smaller saw motors and helps prevent overheating in thinner materials.
    6-1/2" 60-Tooth Tct Saw Blade For Aluminum & Non-Ferrous Metals
    6-1/2" 60-Tooth Tct Saw Blade For Aluminum & Non-Ferrous Metals

Setting Up and Cutting Safely

Before you cut, confirm that your saw is compatible and set up correctly. These steps apply to both the 7-1/4" and 6-1/2" Benchmark Abrasives TCT blades.

  1. Check saw compatibility: Verify your saw's blade diameter, arbor configuration, and maximum RPM. The saw must be designed to accept the blade's diameter and 5/8" arbor (or diamond knockout configuration). Never install the blade on a machine that exceeds its maximum RPM.
  2. Inspect the blade: Before each use, inspect the blade for cracked, warped, or damaged teeth. Do not use a damaged blade. Keep all factory guards installed and properly functioning.
  3. Secure the workpiece: Clamp or otherwise secure the aluminum workpiece firmly so it cannot shift during the cut. Keep aluminum chips clear of the cutting area.
  4. Use a controlled feed rate: Allow the blade to cut at a controlled feed rate rather than forcing the saw through the material. For demanding applications, saw blade lubricant or cutting wax can reduce aluminum buildup on the teeth.
  5. Wear proper PPE: Wear appropriate eye, face, hearing, and respiratory protection for the material being cut.

Materials These Blades Can Handle

Both Benchmark Abrasives TCT blades are designed for cutting aluminum and other non-ferrous metals. The manufacturer lists aluminum sheet, extrusion, bar stock, profiles, brass, copper, bronze, and similar non-ferrous metals as suitable materials.

Do not use these blades for cutting steel or ferrous metals. Benchmark Abrasives offers separate TCT blades specifically designed for ferrous metal cutting.

Maintenance and Blade Life

Replace or professionally sharpen the blade when cutting performance noticeably declines. Regular inspection for worn or missing teeth helps maintain cut quality and safety.

Artigos relacionados

Customer Service
Início
Produtos
Carrinho
Perfil