返回部落格
產品評論 2026-11-11 Quality Industrial Abrasives and Tools | Benchmark Abrasives 9 瀏覽

Unitized Quick Change Discs for Fine Surface Finishing

Unitized Quick Change Discs for Fine Surface Finishing

Learn how 3" unitized quick change discs with fine 2S grit deliver consistent surface prep and deburring on stainless steel and other metals.

What Makes a Unitized Quick Change Disc Different

A unitized quick change disc is a non-woven abrasive wheel made from compressed, cured layers of nylon fibers impregnated with silicon carbide grains. Unlike coated discs or flap wheels, the abrasive is distributed throughout the material, so the disc continues to cut as the outer layers wear away. This construction gives you a consistent finish over the life of the disc.

The 3" unitized quick change disc in 2S fine grit is specifically designed for surface preparation and finishing on large stainless steel surfaces. It produces a very fine, uniform surface finish that can, depending on the job, be sufficient preparation before high-gloss polishing.

Matching the Disc to Your Tool and Backing Pad

These discs use an R-type quick change connection and require a 3" Type R quick change backing pad (sold separately). The mandrel is also sold separately, so make sure you have both before starting. The disc runs at a maximum of 15,000 RPM and is intended for use on die grinders and hand-held pneumatic grinders.

Always keep all guards in place on your machine and wear proper PPE: safety glasses, hearing protection, respirator, and hand protection.

Product Specifications at a Glance

  • 3" Unitized Quick Change Discs 2S Fine - 5 Pack: 3" outer diameter, R-type quick change connection, silicon carbide grain, 2S fine grit, max RPM 15,000, 5 pieces per pack. These specs confirm the disc fits standard 3" quick change systems and is safe for die grinders up to 15,000 RPM.
    3" Unitized Quick Change Discs 2S Fine - 5 Pack
    3" Unitized Quick Change Discs 2S Fine - 5 Pack

Where to Use a 2S Fine Unitized Disc

The 2S fine disc is effective on ferrous materials (cast iron, steel, stainless steel, titanium, nickel, wrought iron) as well as non-ferrous materials like copper and aluminum. It also works on other materials such as fiberglass, plastic, hard rubber, wood, and stone. This versatility makes it a practical choice for shops that handle mixed metal and composite work.

Because the disc is bi-directional and resists loading, you can use it in both directions without clogging. Minimal heat buildup helps protect the workpiece and extends disc life.

Deburring and Surface Prep Technique

For deburring, let the disc do the work. Apply light pressure and move the disc across the edge or surface at a consistent speed. The non-woven fibers conform to contours, making it easier to reach into grooves or along curved edges without gouging the base material.

If you need a finer finish before polishing, the 2S fine disc can produce a surface that is ready for high-gloss buffing with minimal additional steps. The key is to maintain a steady, even pass and avoid dwelling in one spot, which could create uneven texture.

相關文章

Customer Service
首頁
商品
購物車
我的