Precious Metals/Jewelry 2-Step Buffing Kit For Angle Grinder

• Product Specification
• Shipping
• Refund

Product Specification

Precious Metals/Jewelry 2-Step Buffing Kit For Angle Grinder

Included in this kit:

4-1/2" Felt Flap Disc x 2

White Rouge Stainless Compound (second step) x 1

Red Jewelers Rouge Compound (third step) x 1

STEPS:

First Step - Use the white rouge compound for a natural luster finish.

Second Step - Use the red jewelers rouge compound for a high luster finish.

***Read our Safety Tips/Techniques below for additional use recommendations if this is your first time using this product.

The precious metals/jewelry 2 step kit is designed for use on precious metals like gold & silver as well as other non-ferrous metals.

Quantity: 1 Set

Machines Used On:

• Angle Grinders sized 4-1/2” to 5”

Application:

• Non-Ferrous Materials – Gold, Silver, Platinum, Palladium, Rhodium, Iridium and Osmium

• Dry use Only

Safety Tips/techniques:

• Only use one buffing wheel per compound type to eliminate cross contamination between compounds.  We suggest marking each buffing wheel with a marking pen for easy reference.

• Bring the compound to a spinning buffing wheel to melt the compound onto the buffing wheel.  Friction will melt the compound onto the buffing wheel surface.  Make sure not to overload the buffing wheel.

• Ensure the work piece is held firmly in place before bringing the buffing wheel to the material.  Apply light pressure, let the wheel and compound do the work.

• When removing the buffing wheel from the material, remove at a slanting downward stroke to blend buffing marks and avoid unintended spotty or streaking results.

• Never allow the edge the of the buffing wheel make contact with the edge of your work; this can result in the machine being ripped from your hands or damage to the buffing wheel.  

• Always wear proper PPE to include (but not limited to) safety glasses, hearing protection, respirator, and hand protection.  Keep all guards in place on your machine.