5" X 7/8" Zirconia Resin Fiber Disc – 25 Pack

• Product Specification
• Shipping
• Refund

Product Specification

5" X 7/8" ZIRCONIA RESIN FIBER DISC – 25 PACK

Benchmark Abrasives 5" zirconia resin fiber discs are built for aggressive grinding, stock removal, weld removal, beveling, and surface preparation where longer abrasive life and stronger cutting performance are needed. Zirconia alumina grain is tougher than standard aluminum oxide and continually exposes fresh cutting edges under pressure, making it a strong choice for demanding metalworking and fabrication applications.

Each disc combines zirconia alumina abrasive with a heat-resistant resin bond and heavy-duty vulcanized fiber backing. The rigid fiber backing supports the abrasive during grinding and helps transfer pressure efficiently to the workpiece for controlled, consistent stock removal. Available in 24, 36, 50, 60, 80, and 120 grit, these discs can handle heavy grinding, weld leveling, blending, deburring, and preparation for subsequent finishing operations.

These discs are designed for use on right-angle grinders with a compatible 5" backing pad. A backing pad is required and sold separately.

Quantity: 25 Discs

Dimensions & Specifications

Product Features

• Durable zirconia alumina abrasive for aggressive grinding and stock removal.
• Self-sharpening grain continually exposes fresh cutting edges under grinding pressure.
• Longer abrasive life than standard aluminum oxide in demanding applications.
• Heat-resistant resin bond helps the disc withstand sustained grinding.
• Heavy-duty vulcanized fiber backing provides strong support and controlled pressure transfer.
• Resistant to heat, glazing, and loading.
• Wide grit range for heavy stock removal through blending and surface preparation.
• 7/8" center hole for use with compatible right-angle grinder backing pads.
• Suitable for dry use only.
• 25 discs per package.

Machines Used On

• Right-Angle Grinders
• Angle Grinders

Backing Pad Required: Use with a compatible 5" x 5/8"-11 resin fiber disc backing pad. Backing pads are sold separately.

Always make sure the disc, backing pad, and grinder are compatible in diameter, arbor, and operating speed. Never exceed the maximum RPM of the lowest-rated component in the system.

Applications

Ideal for demanding grinding and surface preparation applications including:

• Heavy stock removal
• Weld removal and weld leveling
• Weld blending
• Beveling and edge preparation
• Deburring
• Shaping and contouring
• Rust and corrosion removal
• Paint and coating removal
• Cleaning and surface preparation
• Blending and smoothing

Materials

Commonly used on:

• Carbon Steel
• Stainless Steel
• Cast Iron
• Titanium
• Nickel
• Wrought Iron
• Copper
• Fiberglass
• Plastics and Composites
• Hard Rubber
• Wood
• Stone

These material categories match the current Benchmark listing.

Tip: Zirconia performs best when enough grinding pressure is applied to continually fracture the abrasive grain and expose fresh cutting edges. Using too little pressure can reduce the self-sharpening effect and limit performance.

Aluminum Oxide vs. Zirconia vs. Ceramic

Aluminum Oxide

Aluminum oxide is the economical choice for routine grinding, lighter-duty applications, and general shop work.

Zirconia

Zirconia is the step-up choice when you need more aggressive stock removal, longer abrasive life, and stronger performance under sustained grinding pressure. It is particularly well suited to fabrication, weld removal, beveling, and demanding steel applications.

Ceramic

Ceramic is the premium option for the highest-production grinding applications, stainless steel, high-nickel alloys, hard metals, and situations where maximum cutting speed and abrasive life justify the higher cost.

For most users who want a noticeable performance upgrade over Aluminum Oxide without moving to the cost of Ceramic, Zirconia provides an excellent balance of cutting speed, durability, and value.

Safety Tips & Techniques

• Always use a compatible backing pad specifically designed for resin fiber discs.
• Inspect the disc and backing pad before use. Do not use damaged, cracked, torn, or moisture-compromised discs.
• Never exceed the maximum RPM marked for the disc, backing pad, or grinder. The lowest-rated component determines the maximum safe operating speed.
• Keep the grinder guard properly installed and positioned.

• Use appropriate eye and face protection, hearing protection, gloves, protective clothing, and respiratory protection for the material being worked.

• Allow the zirconia grain to cut under consistent working pressure rather than forcing the grinder excessively.
• Keep the grinder moving across the workpiece to help control heat and avoid gouging.
• Store fiber discs in a clean, dry environment to protect the backing from moisture and damage.