Terug naar blog
Koopgidsen 2026-11-20 Quality Industrial Abrasives and Tools | Benchmark Abrasives 0 weergaven

How to Choose the Right Hole Saw Arbor for Your Project

How to Choose the Right Hole Saw Arbor for Your Project

Learn how to match a hole saw arbor to your bi-metal hole saw and drill. Understand thread sizes, hex shank benefits, and compatibility for clean cuts.

Start With the Arbor Thread That Matches Your Hole Saw

A hole saw arbor is the adapter that connects your hole saw to your drill. The most important fit detail is the thread that attaches the arbor to the hole saw. Bi-metal hole saws from Benchmark Abrasives come with one of two arbor thread sizes: 1/2"-20 or 5/8"-18. Choosing the wrong thread means the saw won't mount at all, so check the hole saw's listed arbor diameter before you buy.

For example, the 11/16" Bi-Metal Holesaw (17mm outer diameter) uses a 1/2"-20 thread. The 1-11/16" Bi-Metal Holesaw (43mm outer diameter) and the larger 4-3/8" Bi-Metal Holesaw (111mm outer diameter) both use a 5/8"-18 thread. Each saw is sold separately from the arbor, so you always have the flexibility to pick the arbor that fits your drill's chuck.

Arbor Thread Sizes at a Glance

  • 11/16" Bi-Metal Holesaw: Arbor Diameter – 1/2”-20 THR This 11/16" bi-metal hole saw requires an arbor with a 1/2"-20 thread. Match it to an arbor like the 7/16" hex shank model (also 1/2"-20) for a secure fit.
    11/16" Bi-Metal Holesaw
    11/16" Bi-Metal Holesaw
  • 1-11/16" Bi-Metal Holesaw: Arbor Diameter – 5/8”-18 THR This 1-11/16" hole saw uses the larger 5/8"-18 thread. You'll need an arbor with that thread size; the 7/16" hex shank arbor (1/2"-20) will not fit this saw.
    1-11/16" Bi-Metal Holesaw
    1-11/16" Bi-Metal Holesaw
  • 4-3/8" Bi-Metal Holesaw: Arbor Diameter – 5/8”-18 THR The 4-3/8" hole saw also uses a 5/8"-18 thread. Both the 1-11/16" and 4-3/8" saws can share the same arbor type, simplifying your kit.

Hex Shank Arbors Prevent Spinout

The shank of the arbor is the part that goes into your drill's chuck. A hex shank, like the 7/16" hex shank on the Benchmark Abrasives hole saw arbor, helps prevent the bit from spinning in the chuck under load. This is especially useful when cutting through tougher materials like ferrous metals or thick wood composites.

That arbor also includes a pilot drill, which helps center the cut and guides the hole saw through the material. It fits all hole saws between 9/16" and 1-1/8", making it a good match for smaller bi-metal saws like the 11/16" model. For larger saws above 1-1/8", you will need an arbor with a 5/8"-18 thread and a compatible shank size.

Arbor Compatibility Example

  • 7/16" Hex Shank, 1/2"-20 Thread - Hole Saw Arbor with Pilot Drill: Shank Diameter – 7/16” hex shank. Arbor attachment – 1/2”-20 THR. Fits all hole saws between 9/16” and 1-1/8”. This arbor is designed for smaller hole saws (up to 1-1/8"). Its hex shank provides a secure grip in the drill chuck, and the included pilot drill saves a separate purchase.

Match the Arbor Shank to Your Drill Chuck

Most electric rotary drills accept a 3/8" or 1/2" round shank, but a 7/16" hex shank may also fit if your chuck opens wide enough. The 7/16" hex shank arbor from Benchmark Abrasives is designed for use with electric powered rotary drills. If your drill has a keyless chuck, the hex shape can sometimes be easier to tighten than a round shank.

For larger hole saws (1-11/16" and up), the recommended arbors have a 5/8"-18 thread and a shank size of 3/8" or 7/16". Always confirm that your drill's chuck can accept the shank diameter before you start cutting.

Quick Fit Checklist

  • Check the hole saw's arbor thread: Look for "1/2"-20 THR" or "5/8"-18 THR" on the saw's specs. This must match the arbor's thread.
  • Confirm the arbor shank fits your drill: Measure your drill chuck opening. The 7/16" hex shank works in most 3/8" or larger chucks, but verify before buying.
  • Consider the pilot drill: Some arbors include a pilot drill, which helps start the cut accurately. The 7/16" hex shank arbor comes with one.
  • Use the arbor with the correct saw size range: The 1/2"-20 arbor fits saws from 9/16" to 1-1/8". Larger saws need a 5/8"-18 arbor.

Safety and Setup Notes

Always wear proper PPE, including safety glasses, hearing protection, respirator, and hand protection when using hole saws. Keep all guards in place on your machine. The arbor attaches to the hole saw so the drill can hold it; make sure the arbor is fully tightened before use. The pilot drill should be sharp and centered to avoid wandering.

For bi-metal hole saws, the 4/6 variable pitch teeth and positive rake angle are designed for fast, clean cuts in wood, ferrous metals, non-ferrous metals, wood composites, plastics, rubber, and drywall. Side cutouts in the saw help remove debris and plugs.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel