Why a Flap Disc Works on Aluminum
Aluminum is soft and gummy compared to steel. Standard grinding wheels load up quickly, leaving the abrasive clogged and useless. A flap disc designed for aluminum uses a stearate coating and a premium zirconia blend that resists loading, so you can grind, blend, and finish without stopping to clean the disc.
The Cut, Grind, Finish - Mixed Pack for Aluminum from Benchmark Abrasives includes high-density flap discs in 36 and 60 grit, plus cutting and grinding wheels, all formulated for non-ferrous materials. The flap discs are manufactured on computer-controlled machines using European zirconia cloth, which provides uniform particle size and 40% more abrasive per snippet than standard-density discs.
How to Grind and Finish Aluminum with a Flap Disc
- Choose the right grit for the stage: Start with 36 grit for heavy stock removal, weld blending, or shaping. Switch to 60 grit for finer finishing and deburring. The Mixed Pack includes both, so you can move through stages without buying separate discs.
- Mount the disc on a compatible angle grinder: Use a 4-1/2" or 5" angle grinder with a 7/8" arbor. The flap disc is a T27 type, which works with standard guard and spindle configurations. Always keep all guards in place.
- Use light pressure and a flat angle: Let the abrasive do the work. Pressing hard generates heat that can melt aluminum and load the disc. A flat or shallow angle (10–15°) produces a smooth finish and extends disc life.
- Work in a consistent direction: For finishing, move the disc in one direction rather than scrubbing back and forth. This leaves a uniform scratch pattern that is easy to blend or paint over.
Key Specifications for Aluminum Flap Discs
- Cut, Grind, Finish - Mixed Pack for Aluminum: The flap discs in this pack are made with European zirconia cloth and a stearate coating to prevent loading on aluminum. Zirconia grain stays sharp longer than aluminum oxide on non-ferrous metals, and the stearate coating reduces gumming so you spend less time cleaning the disc.

Cut, Grind, Finish - Mixed Pack for Aluminum - Cut, Grind, Finish - Mixed Pack for Aluminum: Each high-density flap disc packs 40% more abrasive than standard-density discs. More abrasive means faster cutting and longer disc life, which matters when you are working through multiple pieces of aluminum.
- Cut, Grind, Finish - Mixed Pack for Aluminum: Maximum RPM is 13,500 for these 4-1/2" discs. Most angle grinders run at 10,000–12,000 RPM, so this disc is safe on common tools. Always check your grinder's no-load speed against the disc rating.
Safety and Compatibility Notes
Always wear safety glasses, hearing protection, a respirator, and hand protection when grinding aluminum. The fine dust and sparks are hazardous, and aluminum particles can be irritating to the lungs.
Keep all guards in place on your angle grinder. These flap discs are designed for non-ferrous materials like aluminum, copper, zinc, and magnesium. They will technically cut ferrous materials, but for best tool life on steel or iron, use wheels formulated for ferrous metals.
The Mixed Pack also includes Type 1 and Type 27 cutting wheels and Type 27 grinding wheels, all sized for 4-1/2" grinders. This makes it a practical starter kit if you are new to working aluminum.


