Choosing a Carbide Burr Shape for Your Work
When you need to deburr, contour, or finish metal or non-metal materials, the shape of your tungsten carbide burr determines how easily you can reach tight spots and what kind of cut you'll get. Tree shape, oval, and cylinder burrs each handle different geometries. Here's how to match the burr shape to your task.
Tree Shape vs Oval vs Cylinder at a Glance
All three burrs are double cut, which leaves a smoother finish than single cut by producing smaller chips. They share a maximum RPM of 70,000 (though over 35,000 is rarely needed) and are designed for die grinders and hand-held pneumatic grinders. The key differences are head shape, cutting length, and shank diameter.
- SF-5 Tree Shape (Radius End): 1/2" head diameter, 1" length of cut, 1/4" shank. Best for narrow interior contours and rounded edge processing in small places. The radius end helps you follow curved surfaces without gouging.
- SE-1 Oval/Egg Shape: 1/4" head diameter, 3/8" length of cut, 1/4" shank. Ideal for contouring and rounded edge processing with smaller chip production. The oval profile works well in confined spaces where a tree shape is too long.
- SC-51 Cylinder Shape (Radius End): 1/4" head diameter, 1/2" length of cut, 1/8" shank. Suited for interior contour work like peripheral and face milling. The flat sides with a radius end give you a straight wall cut with a smooth bottom corner.
Matching Shape to Application
For deburring inside holes or along curved edges, a tree shape burr like the SF-5 lets you reach into tight radii without overcutting. The oval SE-1 is a good choice when you need a compact cutting head for small, detailed contour work. If you're cleaning up a flat face or milling a slot, the cylinder SC-51 gives you a straight cutting surface with a radius end that prevents sharp corners.
Product Specifications
- SF-5 Tree Shape - Radius Premium Tungsten Carbide Burr: SF-5 Tree Shape: 1/2" head diameter, 1" length of cut, 1/4" shank, double cut, max RPM 70,000. The longer cutting length and larger head make it effective for interior contour work and rounded edge processing in small spaces.

SF-5 Tree Shape - Radius Premium Tungsten Carbide Burr - SE-1 Oval/Egg Shape Premium Tungsten Carbide Burr: SE-1 Oval/Egg Shape: 1/4" head diameter, 3/8" length of cut, 1/4" shank, double cut, max RPM 70,000. The compact oval head produces smaller chips and is ideal for detailed contouring and tight-radius work.

SE-1 Oval/Egg Shape Premium Tungsten Carbide Burr - SC-51 Cylinder Shape Radius End Premium Tungsten Carbide Burr: SC-51 Cylinder Shape Radius End: 1/4" head diameter, 1/2" length of cut, 1/8" shank, double cut, max RPM 70,000. The cylinder shape with radius end works well for peripheral and face milling, and the smaller 1/8" shank fits precision die grinders.
Material Compatibility and Cut Type
All three burrs are double cut, making them suitable for ferrous metals (cast iron, steel, stainless, titanium, nickel, wrought iron), non-ferrous metals like copper, and other materials such as fiberglass, plastic, hard rubber, wood, and stone. Double cut burrs are the most popular choice because they handle medium stock removal, deburring, finishing, and cleaning across a wide range of materials.
Shank Size and Tool Compatibility
The SF-5 and SE-1 both use a 1/4" shank, which fits most standard die grinders and pneumatic grinders. The SC-51 uses a 1/8" shank, so it requires a collet or chuck that accepts the smaller diameter. Check your tool's collet size before choosing a burr. All three burrs should be used in a die grinder or hand-held pneumatic grinder, not in an electric power drill, because the slower drill speeds can cause chipping.
Safety and Operating Tips
Always wear proper PPE: safety glasses, hearing protection, respirator, and hand protection. Keep all guards in place on your machine. Start with a slower speed and increase gradually until you achieve the best results. Apply light pressure and let the tool do the work; bearing down reduces tool life and dulls the burr. If you experience chipping, you are likely operating at too high a speed for the application.




