العودة إلى المدونة
أدلة الشراء 2026-11-16 Quality Industrial Abrasives and Tools | Benchmark Abrasives 12 مشاهدة

Bi-Metal Hole Saw Sizes: Match Diameter to Your Cutout

Bi-Metal Hole Saw Sizes: Match Diameter to Your Cutout

A practical guide to picking bi-metal hole saw diameters, using the 1-1/2" and 3" sizes as examples, plus the arbor and safety details you need before you cut.

Start with the cutout, not the catalog page

A hole saw does not make a hole the size of its name by accident. The stated outer diameter is the size of the hole it cuts, so the first step is to measure the thing that has to pass through or fit inside that opening. If you are cutting for a pipe, a fitting, or a box knockout, measure the actual outside diameter of the part, not the nominal trade size printed on a label. The two are often different.

Once you have that measurement, you can compare it with the hole saw's outer diameter. For a clearance hole, add a small allowance so the part slides in without forcing. For a snug fit, match the diameters closely. The two Benchmark Abrasives bi-metal hole saws in this guide give you a concrete way to see how that works in practice.

Two diameters, two different jobs

  • 1-1/2" Bi-Metal Holesaw: 1-1/2" (38mm) bi-metal hole saw with a 1-1/2" cutting depth and 5/8"-18 threaded arbor. This is the smaller of the two sizes, suited to tighter cutouts where a compact diameter is enough to clear the part.
    1-1/2" Bi-Metal Holesaw
    1-1/2" Bi-Metal Holesaw
  • 3" Bi-Metal Holesaw: 3" (76mm) bi-metal hole saw with a 1-1/2" cutting depth and 5/8"-18 threaded arbor. This is the larger option, giving you a wider opening when the part or fitting requires more clearance.
    3" Bi-Metal Holesaw
    3" Bi-Metal Holesaw

What each diameter is actually for

  • 1-1/2" bi-metal hole saw: Use this when your measured cutout falls near 1-1/2" (38mm). It is a practical choice for smaller pipe runs, cable pass-throughs, and tight spots where a larger saw would not fit or would remove more material than you need.
  • 3" bi-metal hole saw: Use this when the opening needs to be closer to 3" (76mm). That might be a larger fitting, a recessed box, or any cutout where a 1-1/2" hole would be too small to pass the part through.
  • When neither size fits: If your measured cutout is well outside these two diameters, neither saw is the right tool. The supplied records only cover these two sizes, so check the full hole saw range for a diameter that matches your measurement rather than forcing a near miss.

Depth matters as much as diameter

Both saws share a 1-1/2" cutting depth. That number tells you how deep the saw can go in one pass, and it is separate from the diameter. A 3" saw and a 1-1/2" saw can cut the same depth even though the holes are very different sizes. Before you buy, check the thickness of the material you are cutting. If the material is thicker than the saw's cutting depth, you will need a different approach, and the supplied records do not describe one for these two saws.

The cutting depth also affects how you plan the cut. A saw that reaches all the way through in one pass is simpler to use than one that stops short. For most common sheet goods, board stock, and panel materials, a 1-1/2" depth is enough, but measure your actual material rather than assuming.

Shared specs that affect fit and performance

  • 1-1/2" Bi-Metal Holesaw: 4/6 variable pitch teeth with a positive rake angle, cobalt cutting edge laser-welded to a steel alloy backing. The tooth geometry is listed for fast, clean cuts in wood, ferrous and non-ferrous metals, wood composites, plastics, rubber, and drywall.
  • 3" Bi-Metal Holesaw: 4/6 variable pitch teeth with a positive rake angle, cobalt cutting edge laser-welded to a steel alloy backing. The same tooth design carries across both sizes, so your material compatibility does not change just because you pick a different diameter.

The arbor is sold separately, so plan for it

Neither hole saw includes a mandrel. Both use a 5/8"-18 threaded arbor, and the records list compatible arbors with either a 3/8" shank or a 7/16" shank. That means the saw itself is only part of the purchase. If you do not already own a matching arbor and pilot drill, you need to add one before you can use either saw. Check your drill's chuck size against the arbor shank you choose.

The arbor also sets the interface between the saw and your drill. A mismatched thread or shank means the saw will not mount correctly. Confirm the 5/8"-18 thread and the shank diameter before you order, especially if you are buying your first hole saw rather than replacing a worn one.

A simple sizing sequence

  • 1. Measure the part or opening: Use the actual outside diameter of the pipe, fitting, or component that has to pass through the hole. Do not rely on a nominal size label.
  • 2. Compare against the two available diameters: The 1-1/2" (38mm) and 3" (76mm) saws cover two distinct size ranges. Pick the one that matches your measurement, or look for another diameter if neither fits.
  • 3. Check material thickness against the 1-1/2" cutting depth: If your material is thicker than the saw can reach, the saw is not the right tool for that cut.
  • 4. Confirm your arbor and drill: Both saws need a 5/8"-18 threaded arbor, sold separately, with a 3/8" or 7/16" shank. Match that to your drill chuck.
  • 5. Match the saw to the material: The 4/6 TPI bi-metal tooth design is listed for wood, ferrous and non-ferrous metals, wood composites, plastics, rubber, and drywall. If your material is outside that list, check before you cut.

Safety and setup before the first cut

Both product records call for proper personal protective equipment, including safety glasses, hearing protection, a respirator, and hand protection. They also state that all guards should stay in place on your machine. Those are manufacturer safety instructions, not optional suggestions, and they apply equally to the 1-1/2" and 3" saws.

The records list electric powered rotary drills as the machines for both saws. They do not supply operating speeds, feed rates, or step-by-step cutting procedures. If you need those details, check the manufacturer's documentation for your specific drill and arbor rather than guessing. The side cutouts on both saws are there to help you clear debris and plugs, which is useful when you are cutting a series of holes and need to keep the saw from loading up.

مقالات ذات صلة

Customer Service
الرئيسية
المنتجات
السلة
الملف الشخصي